Winkelwagen

Studio auditief

 | 

Randapparatuur

 | 

RME

<< Vorige - Volgende >>


RME HDSP Bundle III


Multiface II + Cardbus EU

Artikelcode: Std-Ra-Rm-10



RME HDSP Bundle III




TECHNICAL SPECIFICATIONS AND FEATURES
 
MULTIFACE 2
  
Supported sample rates: 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, variable 
8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms 
ASIO zero CPU load technology: 0 (zero!)% CPU load when using ALL 36 channels! 
All settings changeable in realtime 
Clock modes slave and master 
Automatic, intelligent master/slave clock control 
Enhanced Mixed mode: All inputs and outputs simultaneously operational 
Unsurpassed Bitclock PLL (audio synchronization) in ADAT mode 
Enhanced Zero Latency Monitoring for latency-free submixes and perfect ASIO Direct Monitoring 
Comes with DIGICheck: the ultimate measurement, analysis and test tool 
Dynamic ratio analog AD: 111.5 dBA, DA: 112 dBA 
THD+N AD: -98 dB (0.0012%), DA: -97 dB (0.0014%) 
Analog level @ 0 dBFS (set by front panel switch): +2 dBV, +13 dBu, +19 dBu 
Dynamic ratio stereo monitor output: 119 dBA, output impedance 30 Ohm 
Input 8 x line (1/4" TRS jacks), 1 x optical (TOSLINK), 1 x coaxial (Cinch), 1 x MIDI, word clock (BNC) 
Input format SPDIF, AES/EBU (Consumer, Professional), ADAT optical  
8 x line (1/4" TRS jacks), 1 x optical (TOSLINK), stereo analog line (TRS), 1 x coaxial (phono), 1 x MIDI, word clock (BNC) 
Format output SPDIF, AES/EBU (Consumer/Professional), ADAT optical

  
HDSP CARDBUS: 
PCMCIA type II, 32 bit CardBus card 
Zero wait state PCI Busmaster interface (130 MB/s transfer rate in both directions) 
Secure BIOS Technology: card stays fully functional even when the flash process fails 
Output: IEEE 1394 connector, RPM bus protocol 
Package contents: PCMCIA type II card, cable 4.5 meter (15 ft) (IEEE 1394), switch-mode power supply 100 V-240 V/12 V - 1.25 A, car cable, battery cable 
 




euro 999.00





Aantal