<< Vorige - Volgende >>

RME Digiface

52 Channel 24 Bit/96 kHz I/O Box

Artikelcode: Std-Ra-Rm-04

RME Digiface

The small box using half the space of a 19" rack doesn't show the included outstanding power and extensive features at first glance. The front panel hosts some useful status LEDs, like MIDI state, lock state of the digital inputs and error state of the host-bus. Additionally there's a high-quality 24 bit/96 kHz analog line output, also usable with headphones, and one MIDI I/O. 

The back of the Digiface offers real Hammerfall connectivity: 1 x MIDI I/O, 3 x ADAT I/O, SPDIF I/O, ADAT Sync In and word clock I/O. This compact multi-channel solution has everything you need. 

  3 x ADAT digital I/O, based on RME's reliable Bitclock PLL 
1 x SPDIF digital I/O, based on RME's reliable DIGI96 technology 
1 x ADAT Sync In (9-pin D-type) for sample accurate transfers 
1 x Word clock I/O (BNC) 
1 x analog Line/headphone output, separate output for independent submix 
2 x MIDI I/O, 32 channels high-speed MIDI 
HDSP Meter Bridge: freely scalable level meters, peak- and RMS calculation directly in hardware 
TotalMix: 1456 channel mixer with 40 bit internal resolution 
S/MUX poured in hardware: 12 channels 96 kHz/24 bit for record and playback on ADAT optical 
...and numerous other features found already in the Hammerfall series. And all this for an unbeatable price!

The parts of the Hammerfall DSP System can be combined freely. Therefore the Digiface can be used with notebooks as well as desktop computers. The connection to notebooks is achieved via a CardBus interface, the connection to desktops via a PCI interface. The interfaces are sold separately.

Supported sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable 
8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms 
ASIO zero CPU load technology: 0 (zero!)% CPU load when using ALL 52 channels! 
All settings changeable in realtime 
Clock modes slave and master 
Automatic and intelligent master/slave clock control 
Enhanced Mixed mode: All inputs and outputs simultaneously operational 
Unsurpassed Bitclock PLL (audio synchronization) in ADAT® mode 
Enhanced Zero Latency Monitoring for latency-free submixes and perfect ASIO Direct Monitoring 
Comes with DIGICheck: the ultimate measurement, analysis and test tool 
Input 3 x optical (TOSLINK), 1 x coaxial (Cinch), 2 x MIDI, word clock (BNC) 
Input format SPDIF, AES/EBU (Consumer, Professional), ADAT® optical  
Output 3 x optical (TOSLINK), coaxial (Cinch), 2 x MIDI, stereo analog line (1/4" TRS), word clock (BNC) 
Format output SPDIF, AES/EBU (Consumer/Professional), ADAT® optical 

Intelligent clock control according to operational mode and present/desired sample rate.
Bitclock PLL
The most reliable receiver circuit for ADAT optical signal.
Enhanced ZLM®
Monitoring of the input signal, independent from clock mode and sample rate.
Professional status and level display at lowest CPU load.
Intelligent Clock Control
Measurement and display of all incoming and used clocks.
Latency Fast Change
Change latency on-the-fly under ASIO, without manual reset or re-boot.
Surveillance and sample accurate synchronization of all channels.
Comparison and display of all input clock status.
Mixes all inputs and all outputs on all outputs. Several independent submixes possible.
Zero Latency Monitoring - ZLM®
Automatic monitoring of the input signal with zero latency.

euro 599.00