<< Vorige - Volgende >>


PCI Audiocard (NB verkrijgbaar tot 01-01-06)

Artikelcode: Std-Ra-Rm-15


DIGI96/8 PAD is the ultimate audio interface for Mac and PC. When using headphones the stepless volume fader control is very convenient, and in ADAT® mode the analog output can be routed to each of the 4 stereo pairs. An optional breakout cable adds professional AES/EBU connectivity using XLR-connectors. 

Despite being built into a computer the card reaches stunning 112 dBA SNR! Professionals will enjoy the easy way to change the Emphasis bit and immediately listen to the changes in sound on the analog output. Playing back encoded AC-3 streams is compatible to every AC-3 decoder by setting the 'Non-Audio' bit.

The optional Expansion Boards (EXB) turn the DIGI96/8 into a fully analog version, with 4 or 8 analog inputs and outputs in exceptional quality. The optional Word Clock Module (WCM) adds word clock input and output, a unique test and 'house clock' mode. And our latest TDIF Expansion (TEB) lets you use the card as TDIF interface as well.

Last but not least: The DIGI96 series includes DIGICheck, the ultimate measurement, analysis and test tool!

The DIGI96 series offers drivers for Windows 95/98 (MME, multi-DirectSound, ASIO 2.0, GSIF, DS/MME/ASIO/GSIF multi-client operation), Windows NT (MME with multi-client operation, ASIO 2.0), Windows 2000/XP (MME, ASIO 2.0, GSIF, MME/ASIO/GSIF multi-client operation), Mac OS 9.x (Sound Manager and ASIO 2.0), Mac OS X (Core Audio), and Linux (OSS and ALSA.) 

DIGI96/8 PAD is also available as Broadcast version, offering an analog input and output level of +6 dBu and 9 dB headroom (+15 dBu @ 0 dBFS.)


Supported sample frequencies: 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz 
All settings changeable in realtime, all output options even in playback mode 
Separate record- and playback circuits; complete master mode 
Enhanced Full Duplex: Different sample rates at input and output possible 
Mixed Mode: ADAT® in - SPDIF out and vice versa at full synchronization 
AutoSync: Automatic and intelligent master/slave clock control 
Unsurpassed Bitclock PLL (audio synchronization) in ADAT® mode 
Optional Word Clock Module (WCM) provides word clock input and output 
TMS (Track Marker Support): Supports CD/DAT start-IDs and the read out of CD subcode 
Comes with DIGICheck: the ultimate measurement, analysis and test tool 
Unique status windows for record and playback, showing mode and sample rate 
Zero Latency Monitoring: Hardware bypass per track, controlled by Punch-in/out 
AutoSelect searches automatically for an input with valid signal 
Combined Channel Interleave/Multi Device driver compatible to almost all recording programs 
Complete interrupt-sharing 
Windows driver with Pentium® optimization (quad times memory transfer) 
High bus transfer rate (up to 130 MByte/s) 
Digital inputs and outputs ground-free transformer coupled 
Super low jitter design: < 1 ns in PLL mode (44.1 kHz, optical in) 
32 bit memory transfer and 128 kB fast SRAM guarantee very low system load 
Analog input +4 dBu/-10 dBV configurable 
Superior analog 24 bit/96 kHz input. Dynamic range 109 dBA 
Flexible superior analog 24 bit/96 kHz monitor output. Dynamic range 112 dBA 
Low impedance output (75 ohm) ready for headphones, stepless output level through software faders 
Speaker Protection minimizes noise during power on/off 
Analog output routable to ADAT® tracks 
Digital I/O: optical (TOSLINK), coaxial (phono), internal (CD-ROM/Sync-I/O). Optional breakout cable (not included in standard version) provides AES XLR connection. 
Formats SPDIF-AES/EBU (Consumer, Professional), ADAT® 

These are only some of DIGI96/8 PAD's capabilities. Click here for a complete list.
Automatic input selection by monitoring all inputs and incoming signals.
Intelligent clock control according to operational mode and present/desired sample rate.
Bitclock PLL
The most reliable receiver circuit for ADAT optical signal.
Enhanced Full Duplex
Simultaneous record and playback even at different sample rates.
Enhanced ZLM®
Monitoring of the input signal, independent from clock mode and sample rate.
Hardware Selftest
Quick hardware check when booting, to improve and ensure full reliability.
Custom chip (FPGA) ensures full performance and minimal driver action.
Latency Fast Change
Change latency on-the-fly under ASIO, without manual reset or re-boot.
Mixed Mode
ADAT® optical in - SPDIF out and vice versa.
Speaker Protection
Minimizes noise during power on/off
Surveillance and sample accurate synchronization of all channels.
Track Marker Support (TMS)
Reads CD subcode and DAT Start IDs.
Zero Latency Monitoring - ZLM®
Automatic monitoring of the input signal with zero latency. 
A complete overview of all the unique technologies in the DIGI96 series can be found here.

euro 339.00