<< Vorige - Volgende >>


52 Channel 24 Bit/192 kHz I/O Card, The Award-Winning Hammerfall DSP System

Artikelcode: Std-Ra-Rm-03


The HDSP 9652 also supports Expansion Boards (EXB). Two internal ADAT inputs and two internal ADAT outputs allow you to realize up to 16 analog inputs, 16 analog outputs, or up to two TDIF ports directly inside the computer.

The HDSP 9652's Secure BIOS Technology allows to perform hardware updates via software/driver without any risk.

3 x ADAT digital I/O, based on RME's reliable Bitclock PLL 
1 x SPDIF digital I/O, based on RME's reliable DIGI96 technology 
1 x Breakout cable for coaxial SPDIF operation 
1 x Word clock I/O (BNC) on included expansion board 
1 x ADAT Sync In (9-pin D-type) for sample accurate transfers 
2 x MIDI I/O, 32 channels high-speed MIDI via breakout cable 
HDSP Meter Bridge: freely scalable level meters, peak- and RMS calculation directly in hardware 
TotalMix: 1352 channel mixer with 40 bit internal resolution 
S/MUX poured in hardware: 12 channels 96 kHz/24 bit for record and playback on ADAT optical 
...and numerous other features found already in the Hammerfall series. And all this for an unbeatable price!

The Hammerfall® DSP System comes with drivers for Windows 98/ME (MME with multi-client operation, ASIO 2.0, GSIF), Windows 2000/XP (full multi-client operation of MME, GSIF and ASIO 2.0), Mac OS 9.x (ASIO 2.0) and Mac OS X (Core Audio, Core MIDI).
Supported sample rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable 
8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms 
ASIO zero CPU load technology: 0 (zero!)% CPU load when using ALL 52 channels! 
All settings changeable in realtime 
Clock modes slave and master 
Automatic and intelligent master/slave clock control 
Enhanced Mixed mode: All inputs and outputs simultaneously operational 
Unsurpassed Bitclock PLL (audio synchronization) in ADAT® mode 
Enhanced Zero Latency Monitoring for latency-free submixes and perfect ASIO Direct Monitoring 
Comes with DIGICheck: the ultimate measurement, analysis and test tool 
Input 3 x optical (TOSLINK), 1 x coaxial (Cinch), 2 x MIDI, word clock (BNC) 
Input format SPDIF, AES/EBU (Consumer, Professional), ADAT® optical  
Output 3 x optical (TOSLINK), coaxial (Cinch), 2 x MIDI, word clock (BNC) 
Format output SPDIF, AES/EBU (Consumer/Professional), ADAT® optical 
Intelligent clock control according to operational mode and present/desired sample rate.  
Bitclock PLL
The most reliable receiver circuit for ADAT optical signal.
Dynamic Bus Utilization
Scalable computer load according to the current usage.
Professional status and level display at lowest CPU load.
Intelligent Clock Control
Measurement and display of all incoming and used clocks.
Latency Fast Change
Change latency on-the-fly under ASIO, without manual reset or re-boot.
Secure BIOS Technology
Automatic BIOS replacement when flash process fails.
Surveillance and sample accurate synchronization of all channels.
Comparison and display of all input clock status.
Mixes all inputs and all playback channels to any hardware output. Up to 13 independent submixes.
Zero Latency Monitoring - ZLM®
Monitoring of the input signal with zero latency. 

euro 585.00