Winkelwagen

<< Vorige - Volgende >>


RME HDSP 9632


32 Channel 24 Bit/192 kHz I/O Card, The Award-Winning Hammerfall DSP System

Artikelcode: Std-Ra-Rm-02



RME HDSP 9632




HDSP 9632 also supports the existing Expansion Boards (EXB). An internal ADAT input and an internal ADAT output allow for up to 14 analog inputs, 14 analog outputs, or the usage of a TDIF interface, directly inside the computer.


Add a word clock module for one in and two outs! 
And / or add a TEB for an additional TDIF port! 
Add 4 analog inputs and/or 4 analog outputs! 
Add a TEB again for an additional TDIF port! 
OR use an older AEB-4i/8i/4o/8o for up to 14 analog inputs or outputs! 
Our recommendation for a killer combo:

HDSP 9632 + WCM + AI44s-192 + AO4s-192 + TEB = all operational at the same time, occupying 1 PCI and 4 more bracket slots within the PC - There's no stopping now!

These are some of the features of the HDSP 9632:

Balanced* stereo analog in- and output, 192 kHz/24 bit, > 110 dB SNR 
Optional analog expansion boards with 4 balanced in- or outputs 
All analog I/Os capable of 192 kHz, constant number of available channels 
1 ADAT digital I/O, supporting 96 kHz S/MUX operation 
1 SPDIF digital I/O, 192 kHz-capable 
1 Breakout cable for coaxial SPDIF* 
Up to 16 I/Os can be used simultaneously! 
1 Stereo headphone output, parallel to the analog out, additional level settings 
1 MIDI I/O with 16 channels of hi-speed MIDI via breakout cable 
TotalMix: 512-channel mixer with 40 bit internal resolution 
* The HDSP 9632 ships in a basic version including two RCA/phono breakout cables (headphone: TRS jack). Therefore all analog I/Os and the SPDIF I/O are unbalanced. XLR breakout cables are available as an option (headphone: Neutrik TRS locking jack), turning analog and AES/EBU into balanced mode.

Included software:

HDSP Meter Bridge: Scalable level meter with Peak- and RMS calculation in hardware 
DIGICheck 4.1 for Windows: Spectral Analyser, professional level meter for 2, 8, or 16 channels, Vector Audio Scope, various other audio analysis tools. 
Drivers: Windows 2000/XP (full ASIO multi-client operation of MME, GSIF 2.0 and ASIO 2.0), Mac OS X (Core Audio, Core MIDI). 
HDSP 9632 debuts SteadyClock™, a newly developed clock technology, combining professional features like maximum jitter suppression at full varipitch capabilities and software controlled sample rates.

 
The optional 9632 Word Clock Module provides a galvanically isolated word clock input and two word clock outputs via BNC jacks. Compared to the well-known DIGI96/8 series, the HDSP 9632 not only offers a further improved analog interface, but also all the features of the award-winning Hammerfall DSP series: All inputs and outputs simultaneously available, MIDI I/O and TotalMix, the DSP-based realtime mixer/router. Hardware updates through software and driver updates are risk-free thanks to the Secure BIOS Technology.

In short: The HDSP 9632 is the ultimate audio interface for PC or Mac, digital or analog.
 
 
 TECHNICAL SPECIFICATIONS AND FEATURES
 
 
  
Supported sample frequencies: Internally 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz. Externally 28 kHz - 200 kHz 
8 buffer sizes/latencies available: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms  
All settings changeable in realtime  
Automatic and intelligent master/slave clock control  
Enhanced Mixed mode: All inputs and outputs simultaneously operational  
TMS (Track Marker Support): Supports CD/DAT start-IDs and the read out of CD subcode  
Unique status windows for record and playback, showing mode and sample rate  
Digital inputs and outputs ground-free transformer coupled 
3-stage hardware level control for analog inputs and outputs 
Servo-balanced analog input and output, DC-coupled signal path 
192 kHz / 24 bit converters. SNR 110 dB RMS unweighted, 113 dBA 
Maximum input and output level (0 dBFS @ HiGain): +19 dBu 
Low impedance headphone output (75 ohm), stepless output level through software faders 
Headphone Speaker Protection minimizes noise during power on/off 
Super low jitter design: < 1 ns in all clock modes 

More details can be found in the HDSP 9632 manual !
 
 
AutoSync
Intelligent clock control according to operational mode and present/desired sample rate.
  
Bitclock PLL
The most reliable receiver circuit for ADAT optical signal.
  
Dynamic Bus Utilization
Scalable computer load according to the current usage.
  
Enhanced ZLM®
Monitoring of the input signal, independent from clock mode and sample rate.
  
DIGICheck DSP
Professional status and level display at lowest CPU load.
  
Intelligent Clock Control
Measurement and display of all incoming and used clocks.
  
Latency Fast Change
Change latency on-the-fly under ASIO, without manual reset or re-boot.
  
Secure BIOS Technology
Automatic BIOS replacement when flash process fails.
  
SyncAlign®
Surveillance and sample accurate synchronization of all channels.
  
SyncCheck®
Comparison and display of all input clock status.
  
TotalMix
Mixes all inputs and all outputs on all outputs. Several independent submixes possible.
  
Zero Latency Monitoring - ZLM®
Automatic monitoring of the input signal with zero latency. 
A complete overview of all the unique technologies in the Hammerfall series can be found here.




euro 475.00





Aantal